Rockwool FirePro® CB Ablative Coating is a water-based fire-resistant ablative coating. It is designed to reseal the surface of FirePro CB50 where damage to the ablative coating may have occurred during installation. FirePro CB50 have been tested as penetration seals and been classified for fire resistance periods of up to 120 minutes in accordance with BS EN 1366-3: 2021+A1: 2024, subject to the application. FirePro CB Coating has replaced FirePro Ablative Liquid as the new EN-tested solution.
* Image shown for illustration purposes only and colour of product could be different but will not affect performance or intended use.
Rockwool FirePro® CB Ablative Coating
Rockwool FirePro® CB Ablative Coating is a water-based fire-resistant ablative coating.
- Suitable for spray or brush application
- Dries to give a white surface finish
- Can be used to enable site repairs to FirePro CB50
£53.50£64.20 Excl. VATIncl. VAT
Product Description
Technical Specification
| Area | 0m2 |
|---|
The information given here may vary and is partly based on information from our suppliers. It represents the prevailing level of expertise and is not binding in a legal sense. The compliance of legal requirements lies within the customers own responsibility.
You can find all of the information shown here on one of our product data sheets which are in a PDF format. You can download this below.
Technical Data Sheet
